Molybdenum is very hard, soft, and tougher than tungsten. Molybdenum has a high modulus of elasticity, tungsten, tantalum, only has a high melting point, molybdenum plate is used for many special steels, and other common uses are molybdenum electrodes, vacuum furnace applications, nuclear energy, missiles and aircraft parts, thicknesses from 00.090 Inches to 3 inches, are listed as molybdenum plates, molybdenum plates are widely used in the construction of molds and parts furnaces, parts manufacturing for the electronics and semiconductor industries.
Silicone molybdenum plates are reviewed using silicon source Si2Cl6 and silicidation conditions and some of its properties. The plate molybdenum silicide is deposited first, such as 4 MoSi2, 6 meters thick in the initial stage (after 10 minutes), and then combined for storage. After 30 minutes, a uniform MoSi2 molybdenum silicide plate is formed. The weight of the anodic dissolved silicone plate doubles at 0.2 M sulfuric acid, reducing the thickness of the MoSi2 layer. Corrosion of seawater and sea sand, wear of organosilicon molybdenum plates, increase the resistivity, thereby increasing the silicidation temperature and the flow of Si2Cl6.